3/4 in. Diameter x 0.325 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP34C5090

3/4 in. Diameter x 0.374 in. Length of Cut x 3 in. Overall Length x 82 Deg. Internal Angle ZRN Coated Carbide Chamfer Mill

Item Code: CMHP34C3082Z

3/4 in. Diameter x 0.562 in. Length of Cut x 3 in. Overall Length x 60 Deg. Internal Angle ZRN Coated Carbide Chamfer Mill

Item Code: CMHP34C3060Z

3/4 in. Diameter x 0.562 in. Length of Cut x 3 in. Overall Length x 60 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP34C5060

3/4 Inch (.7500) Cutting Diameter, Indexable Ball Nose, Tapered Neck Endmill

Item Code: WBMR075SX

10mm Diameter, 15mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX41000C-1.5D

3mm Diameter, 4.5mm Length of Cut, 3 Flute, Solid Carbide, Square End Mill

Item Code: GSX30300C-1.5D

10mm Diameter, 30mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX41000S-3D

10mm Diameter, 40mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX41000C-4D

4mm Diameter, 16mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX40400C-4D

2.5mm Diameter, 7.5mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX40250C3D

6mm Diameter, 9mm Length of Cut, 4 Flute, Solid Carbide, Square End Mill

Item Code: GSX40600C-1.5D

1.250 Inch Indexable Endmill

Item Code: WEZ21250EW05

1-1/2 deg. x 5/8 in. Tip Dia. x 3.25 in. LOC x 3/4 in. Shank x 5.5 in. OAL HSS Tapered Square End Mill - TiN Coated

Item Code: 01590

10 deg. x 1/8 in. Tip Dia x 3/4 in. LOC x 3/8 in. Shank x 2.5 in. OAL Solid Carbide Tapered Square End Mill - AlTiN Coated

Item Code: 03300-WHITNEY