0.0200 in. (.5 mm) Cutter Diameter x 0.0020 in. Radius x 0.1000 in. Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53020-C8

0.0200 in. (.5 mm) Cutter Diameter x 0.0020 in. Radius x 0.1000 in. Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53020-HARVEY

0.0250 in. Cutter Diameter x 0.0020 in. Radius x 0.1250 in. (1/8) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53025-C4

0.0250 in. Cutter Diameter x 0.0020 in. Radius x 0.1250 in. (1/8) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53025-C8

0.0250 in. Cutter Diameter x 0.0020 in. Radius x 0.1250 in. (1/8) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53025-HARVEY

0.0310 in. (1/32) Cutter Diameter x 0.0030 in. Radius x 0.1560 in. (5/32) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53031-C4

0.0310 in. (1/32) Cutter Diameter x 0.0030 in. Radius x 0.1560 in. (5/32) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53031-C8

0.0310 in. (1/32) Cutter Diameter x 0.0030 in. Radius x 0.1560 in. (5/32) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53031-HARVEY

0.0400 in. Cutter Diameter x 0.0030 in. Radius x 0.2030 in. (13/64) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53040-C8

0.0400 in. Cutter Diameter x 0.0030 in. Radius x 0.2030 in. (13/64) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53040-HARVEY

0.0470 in. (3/64) Cutter Diameter x 0.0030 in. Radius x 0.2500 in. (1/4) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53047-C4

0.0470 in. (3/64) Cutter Diameter x 0.0030 in. Radius x 0.2500 in. (1/4) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53047-C8

0.0470 in. (3/64) Cutter Diameter x 0.0030 in. Radius x 0.2500 in. (1/4) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53047-HARVEY

0.0500 in. Cutter Diameter x 0.0030 in. Radius x 0.2500 in. (1/4) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53050-C8

0.0500 in. Cutter Diameter x 0.0030 in. Radius x 0.2500 in. (1/4) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53050-HARVEY