0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88038

0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88128

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88056

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88146

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87636

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87696

0.1250 in. (1/8) Shank Diameter x 120 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87648

0.1250 in. (1/8) Shank Diameter x 120 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87708

0.1250 in. (1/8) Shank Diameter x 60 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87600

0.1250 in. (1/8) Shank Diameter x 60 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87660

0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87612

0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87672

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87624

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87684

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87756