0.1090 in. (7/64) Cutter Diameter x 0.3270 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 72109-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute Carbide Square End Mill

Item Code: 982162

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 20760-C6

0.0400 in. Cutter Diameter x 0.2000 in. Length of Cut x 0.6000 in. Reach 3 Flute Carbide Square End Mill

Item Code: 948240

0.0500 in. Radius x 0.1250 in. (1/8) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45350-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1600 in. Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 56620-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0160 in. Length of Cut x 0.1000 in. Reach 2 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 40620-C6

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.1560 in. (5/32) Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 956831-C3

0.0350 in. (.9 mm) Cutter Diameter x 0.1750 in. Length of Cut x 0.3500 in. Reach 3 Flute Carbide Square End Mill

Item Code: 13635-HARVEY

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 0.1400 in. (9/64) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37893-C6

0.5000 in. (1/2) Cutter Diameter x 1.0000 in. (1) Length of Cut x 90 Deg. Included Drill Style 2 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 46532-C3

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 90 Deg. Included Drill Style 2 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 46516-C3

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 4.3750 in. (4-3/8) Reach 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 14916-C3

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 33493-C3

0.1875 in. (3/16) Shank Diameter x 15 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 72415