0.0100 in. Radius x 0.2050 in. Length of Cut x 20 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 771252

0.0100 in. Radius x 0.2050 in. Length of Cut x 20 Deg. Per Side 2 Flute TiB2 Coated Carbide Runner Cutter

Item Code: 771252-C8

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 771331

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 771331-C3

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 771362

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 771362-C3

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 771393

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 771393-C3

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 771408

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 771408-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 4 Flute Carbide Flat Chamfer Cutter

Item Code: 771545

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 771545-C3

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.3120 in. (5/16) Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 772010

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.3120 in. (5/16) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 772010-C3

0.2500 in. (1/4) Head Diameter x 0.0440 in. Loc x 0.6250 in. (5/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 772116