1.000 mm Cutter Diameter x 1.500 mm Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 846722-C6

1.500 mm Cutter Diameter x 2.200 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 846733-C6

2.000 mm Cutter Diameter x 3.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 846745-C6

3.000 mm Cutter Diameter x 4.500 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 846757-C6

0.0310 in. (1/32) Cutter Diameter x 0.0080 in. Radius x 0.0470 in. (3/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 847831-C6

0.0620 in. (1/16) Cutter Diameter x 0.0080 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 847862-C6

0.0930 in. (3/32) Cutter Diameter x 0.0080 in. Radius x 0.1400 in. (9/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 847893-C6

0.0310 in. (1/32) Cutter Diameter x 0.0080 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 848431-C6

0.0620 in. (1/16) Cutter Diameter x 0.0080 in. Radius x 0.1860 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 848462-C6

0.0930 in. (3/32) Cutter Diameter x 0.0080 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 848493-C6

0.1250 in. (1/8) Cutter Diameter x 0.0080 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 848508-C6

0.0310 in. (1/32) Cutter Diameter x 0.1560 in. (5/32) Length of Cut 3 Flute Carbide V-Helix Ball End Mill

Item Code: 850031

0.0310 in. (1/32) Cutter Diameter x 0.1560 in. (5/32) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 850031-C8

0.0470 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 3 Flute Carbide V-Helix Ball End Mill

Item Code: 850047

0.0470 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 850047-C8