0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 8 Flute Tplus Coated Corner Radius Endmill

Item Code: 86246

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 6 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 843508-C6

1/2 x 1/2 x 1-1/4 x 3 Inch TuffCut XT 5-Flute Endmill - ALtima Blaze Coated 0.015CR

Item Code: 27850022B

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29516

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52308-C6

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-3.172

1/2 (.5000) 4-Flutes, Variable Helix, FC18 Coated Dura-Carb 3400 Harmon-i-Cut End Mill- Square/ Standard

Item Code: 34027

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29524

3/16 x 5/8 x 2 Carbide ALTIN 4 Flute Square End Endmill

Item Code: 44110-COATED

1/2 Inch Diameter HSS TiN Coated 4 Flute,1 Inch LoC, 1/2 Inch Shank, 4-1/8 Inch OAL, Double-End Endmill

Item Code: 70204

0.0469 in. (3/64) Cutter Diameter x 0.0938 in. Length of Cut 4 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC10903

0.0690 in. Cutter Diameter x 0.2070 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74369-C3

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 5 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 915993-C6

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0100 in. Radius x 0.4375 in. (7/16) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 84676

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 7 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 59427