10.00 mm Cutter Diameter x 10.00 mm Shank Diameter x 15.00 mm Length of Cut x 63.00 mm Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 59522-HELICAL

0.5000 in. (1/2) Cutter Diameter x 0.0600 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74436

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 7 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC64820

12.00 mm Cutter Diameter x 12.00 mm Shank Diameter x 0.960 mm Radius x 12.00 mm Length of Cut x 125.00 mm Overall Length x 72.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82716

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0300 in. Length of Cut x 0.1600 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 54820-C6

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/37/38° Helix Angle, 0.0039 chamfer

Item Code: 6757-3.17

3/4 in. Diameter x 2-1/4 in. Length of Cut x 5 in. Overall Length Carbide 3 Flutes Square Endmill

Item Code: GMA34FLH3

0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

Item Code: 07028

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.0600 in. Length of Cut x 0.3250 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 54840-C6

3/8 Inch Diameter Standard Length Solid Carbide TuffCut® General Purpose 4-Flute .02 Corner Radius End Mill

Item Code: 11137502

3/8 (.3750) TIALN Coated Dura-Carb Series 3215 2-Flute GP SE End Mill- Square

Item Code: 30665-FULLERTON

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2810 in. (9/32) Length of Cut x 1.0000 in. (1) Reach 3 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 42812-C4

0.2500 in. (1/4) Shank Diameter x 75 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47675-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Aplus Coated Square Endmill

Item Code: 30512-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 826708-C3