0.1250 in. (1/8) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 5 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 63508-C6

0.0310 in. (1/32) Radius x 0.1070 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68031-C3

0.0100 in. Radius x 0.1875 in. (3/16) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16010-C3

0.3125 in. (5/16) Cutter Diameter x 0.8120 in. (13/16) Length of Cut x 82 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 26520-C3

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 0.9380 in. Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 17640-C3

0.1250 in. (1/8) Cutter Diameter x 1.8750 in. (1-7/8) Length of Cut 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 35908-C3

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 994716

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997116

0.3750 in. (3/8) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 997124

0.1250 in. (1/8) Cutter Diameter x 0.1880 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17808-C6

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17793-C6

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.4700 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 48931-C4

0.3750 in. (3/8) Shank Diameter x 60 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18460-C3

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16050-HARVEY

0.0500 in. Radius x 0.1250 in. (1/8) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45350-HARVEY