0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.3120 in. (5/16) Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 845262-C6

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: TC11608

0.1250 in. (1/8) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 990499-C6

0.0930 in. (3/32) Radius x 0.1100 in. (2.8 mm) Pilot Diameter 2 Flutes Carbide Corner Rounding DE Endmill

Item Code: 793493

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 83099

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 4 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 859708-C3

5/8 x 5/8 x 1-1/4 x 3-1/2 Inch TuffCut XT 4-Flute Endmill - .030CR ALtima Blaze Coated

Item Code: 27762514B

0.0190 in. Cutter Diameter x 0.0570 in. Length of Cut 3 Flute Carbide Square End Mill

Item Code: 836319

0.3125 in. (5/16) Cutter Diameter x 0.8125 in. (13/16) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC10520

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated High Feed Endmill

Item Code: 83723-HELICAL

3/16 Inch Diameter, 0.01 Inch Radius, 3-Flute, Solid Carbide TiCN Coated, TuffCut® GP Corner Radius End Mill

Item Code: 11618758C

0.3750 in. (3/8) Shank Diameter x 75 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 72575-C3

1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 30034-FULLERTON

0.1875 in. (3/16) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29312

0.1875 in. (3/16) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 12512-C3