0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59891

1/4 in. Diameter x 1/2 in. Length of Cut x 2 in. Overall Length Carbide 5 Flutes Square WTF Coated Endmill

Item Code: GMHT14FS5WTF

1/4 in. x 1/4 in. x 3/4 in. Solid Carbide General Purpose Square End 4 Flute Endmill

Item Code: 4SE0250IR075A KC633M

5/8 in. x 1-1/2 in. x 3-1/2 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-625350

5/64 (.0781) TICN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 30342-FULLERTON

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT38RH5030WTF

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Aplus Coated Carbide Ball Endmill

Item Code: 56142-HELICAL

1/2 Inch Diameter, 5/8 Inch LOC, 2-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill with 0.030 Radius

Item Code: 17850004A

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83248

3/32 x 3/16 x 1-1/2 Inch ALTiN Coated 2-Flute Ballnose Stub Length Endmill

Item Code: 05130-200-Z5

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 8 Flute Tplus Coated Corner Radius Endmill

Item Code: 86245

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.2500 in. (1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 787562-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 34262-C3

0.1875 in. (3/16) Cutter Diameter x 0.0080 in. Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 937908-C3

5/32 (.1562) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 30725-FULLERTON