0.2500 in. (1/4) Cutter Diameter x 0.750 in. (3/4) Length of Cut Carbide 5 Flute Square Endmill

Item Code: VHM-250-5

0.3750 in. (3/8) Cutter Diameter x 0.020 in. Radius x 0.875 in. (7/8) Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHM-375-5-020K

0.4375 in. (7/16) Cutter Diameter x 0.020 in. Radius x 1.000 in. (1) Length of Cut Carbide Carbide 4 Flute Corner Radius Endmill

Item Code: VHM-437-4

0.4375 in. (7/16) Cutter Diameter x 0.020 in. Radius x 1.000 in. (1) Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHM-437-4X

0.5000 in. (1/2) Cutter Diameter x 0.090 in. Radius x 1.000 in. (1) Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHM-500-5-090K

0.5000 in. (1/2) Cutter Diameter x 0.125 in. (1/8) Radius x 1.000 in. (1) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHM-500-5-125

0.5000 in. (1/2) Cutter Diameter x 0.030 in. Radius x 1.250 in. (1-1/4) Length of Cut Carbide Carbide 4 Flute Corner Radius Endmill

Item Code: VHM-5125-4

0.5000 in. (1/2) Cutter Diameter x 1.250 in. (1-1/4) Length of Cut Carbide nACRo Coated 5 Flute Square Endmill

Item Code: VHM-5125-5K

0.7500 in. (3/4) Cutter Diameter x 1.500 in. (1-1/2) Length of Cut Carbide 5 Flute Square Endmill

Item Code: VHM-750-5

0.7500 in. (3/4) Cutter Diameter x 0.125 in. (1/8) Radius x 1.500 in. (1-1/2) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHM-750-5-125

3.000 mm Cutter Diameter x 0.50 mm Radius x 8.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHMM-030-4X

4.000 mm Cutter Diameter x 0.30 mm Radius x 11.00 mm Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHMM-040-5

5.000 mm Cutter Diameter x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Carbide 4 Flute Corner Radius Endmill

Item Code: VHMM-050-4

6.000 mm Cutter Diameter x 0.50 mm Radius x 16.00 mm Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHMM-060-5K

10.000 mm Cutter Diameter x 0.60 mm Radius x 22.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHMM-100-4X