3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 30032-FULLERTON

0.1000 in. Cutter Diameter x 0.1500 in. Length of Cut x 1.0000 in. (1) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 966100-C3

3/4 in. x 3/4 in. x 1-1/2 x 4 in. Solid Carbide TiALN-LW 4 Flute Weldon Shank Square End .020 Corner Chamfer Width End Mill

Item Code: TF4V0519007

0.0200 in. (.5 mm) Cutter Diameter x 0.2000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 27120-C6

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 0.7500 in. (3/4) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 34293-C3

0.1562 in. (5/32) Cutter Diameter x 0.4700 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 967110-C6

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 74362-C4

0.2187 in. (7/32) Cutter Diameter x 0.3300 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 33314-C3

3/8 Tuff Cut® DM, Multi-Flute, ALtima 52 Coated, Non-Center Cutting, Endmill

Item Code: 15737500A

0.1562 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 1.5700 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 982210-C3

0.0310 in. (1/32) Cutter Diameter x 0.1560 in. (5/32) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 940931

0.0100 in. Radius x 0.1210 in. Length of Cut x 45&deg per side 2 Flutes AlTiN Nano Coated Carbide Runner Cutter

Item Code: 856552-C6

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 1.0000 in. (1) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 3 Flute Zplus Coated 45 Deg. Helix Square Endmill

Item Code: 81554

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 6 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 83319

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0600 in. Radius x 2.0000 in. (2) Length of Cut x 4.0000 in. (4) Overall Length Carbide 2 Flute Zplus Coated 45 Deg. Helix Corner Radius Endmill

Item Code: 82380