3mm Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill

Item Code: 15611810A

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83483

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59877-HELICAL

0.0450 in. Cutter Diameter x 0.4500 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Ball End Mill

Item Code: 34445-C6

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0150 in. (1/64) Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83261-HELICAL

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-4.762

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.1560 in. (5/32) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 64431-C6

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 84092-HELICAL

5/16 Inch Solid Carbide Alumastar Coated 2-Flute HSAL Square End Series 142M Endmill

Item Code: 41602-GARR

1/8 Inch Diam, 3/8 Inch Length of Cut, Solid Carbide TuffCut® General Purpose 2-Flute Ball Nose End Mill

Item Code: 15012500A

3/8 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT38RS5030WTF

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29540

1/16 (.0625) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub

Item Code: 32866

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Ball Endmill

Item Code: 83284-HELICAL

3/8 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes WTF Coated Endmill

Item Code: GMRF38RS4015WTF