0.0930 in. (3/32) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 886293-C6

0.2500 in. (1/4) Cutter Diameter x 0.0750 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 36275-C3

0.0938 in. Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: TC11606

5/16 (.3125) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub

Item Code: 32874-FULLERTON

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 81857

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT14R5060WTF

3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 30727-FULLERTON

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-6.354

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 6 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 84396

0.0620 in. (1/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1860 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 28162-C3

1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .030CR

Item Code: 37650-FULLERTON

0.1250 in. (1/8) Cutter Diameter x 0.1880 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 4 Flute AlTiN Nano Coated Carbide Square End Mill

Item Code: 30908-C6

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 27137

3/16 Inch Diameter Solid Carbide AlTiN Coated, 4 Flute, 5/8 Inch LoC, 2 Inch OAL .020” Corner Radius Endmill

Item Code: 14060-COATED

7/64 (.1094) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

Item Code: 30610