0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut x 0.3750 in. (3/8) Reach 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 904447-C3

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 0.6250 in. (5/8) Reach 4 Flute Carbide Ball End Mill

Item Code: 904478

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 0.6250 in. (5/8) Reach 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 904478-C3

0.0470 in. (3/64) Cutter Diameter x 0.0100 in. Radius x 0.1410 in. Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 904647-C4

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.2790 in. Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 904693-C4

0.2500 in. (1/4) Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 905116

0.2500 in. (1/4) Cutter Diameter x 0.3120 in. (5/16) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 905116-C3

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.1090 in. (7/64) Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 906015

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.1090 in. (7/64) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906015-C3

0.0800 in. Head Diameter x 0.0140 in. Loc x 0.0700 in. Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 906080

0.0800 in. Head Diameter x 0.0140 in. Loc x 0.0700 in. Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906080-C3

0.2500 in. (1/4) Head Diameter x 0.0440 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906116

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.1250 in. (1/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906119

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.1250 in. (1/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906119-C3

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.1560 in. (5/32) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906130