0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 1.5 Deg. 0.5880 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997849-C8

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 1.5 Deg. 1.0660 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997856

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 1.5 Deg. 1.0660 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997856-C8

0.0780 in. (5/64) Cutter Diameter x 0.0620 in. (1/16) Length of Cut x 1.5 Deg. 0.6940 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997863

0.0780 in. (5/64) Cutter Diameter x 0.0620 in. (1/16) Length of Cut x 1.5 Deg. 0.6940 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997863-C8

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 1.5 Deg. 0.8010 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997870

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 1.5 Deg. 0.8010 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997870-C8

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1.5 Deg. 1.2930 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997877

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1.5 Deg. 1.2930 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997877-C8

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 1.5 Deg. 1.3430 in. (1-11/32) Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997887

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 1.5 Deg. 1.3430 in. (1-11/32) Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997887-C8

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.5 Deg. 1.3930 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 997892

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.5 Deg. 1.3930 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 997892-C8

0.0450 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0680 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 997945

0.0470 in. (3/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0710 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 997947