1 Inch Diameter Endmill, 1 Shank, 5 flutes, 1-3/4 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0315 chamfer

Item Code: 3186-25.400

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3186-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3186-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3186-9.520

1 Inch Diameter Endmill, 1 Shank, 5 flutes, 1-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0315 chamfer

Item Code: 3188-25.400

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3188-6.350

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3190-19.050

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3190-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3190-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3190-9.520

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1/2 Length of Cut, 2-3/4 Reach, Carbide, nano-Si Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, 0.02 radius

Item Code: 3192-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 5/8 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 30° Helix Angle, 0.025 radius

Item Code: 3192-15.870

3/16 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/16 Length of Cut, 3/4 Reach, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.008 radius

Item Code: 3192-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.01 radius

Item Code: 3192-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 5/16 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.013 radius

Item Code: 3192-7.940