5/16 in. x 13/16 in. x 2-1/2 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-312250

1/16 Inch Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill

Item Code: 15606250A

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0600 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59872-HELICAL

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 956578

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 6 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 82230-HELICAL

5/16 (.3125) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

Item Code: 30623

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 967078-C6

3/16 in. Diameter x 3/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes WTF Coated Endmill

Item Code: GMRF316RS4015WTF

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length Carbide 5 Flutes Square GMS2 Coated Endmill

Item Code: GMHT12FXL5

3/8 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Square TiAlN Coated Endmill

Item Code: CEM38F4TIALN

1/2 (.5000) TIALN Coated Dura-Carb Series 3215 2-Flute GP SE End Mill- Square

Item Code: 30673-FULLERTON

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 980210-C3

0.0930 in. (3/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2790 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 28193-C3

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 989762-C8

4.00mm (.1575) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

Item Code: 92207