0.0400 in. Radius x 0.0970 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87671

0.0470 in. (3/64) Radius x 0.0830 in. (2.1 mm) Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87672

0.0500 in. Radius x 0.0770 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87673

0.0600 in. Radius x 0.1200 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87674

0.0620 in. (1/16) Radius x 0.1160 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87675

0.0780 in. (5/64) Radius x 0.1460 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87676

0.0930 in. (3/32) Radius x 0.1160 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87677

0.1000 in. Radius x 0.1650 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87678

0.1250 in. (1/8) Radius x 0.1770 in. (4.5 mm) Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87679

0.1560 in. (5/32) Radius x 0.1770 in. (4.5 mm) Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87680

0.1870 in. (3/16) Radius x 0.2400 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87681-HELICAL

0.2500 in. (1/4) Radius x 0.2390 in. Pilot Diameter Carbide 2 Deg. Flare 5 Flute APLUS Coated Corner Rounding Endmill

Item Code: 87682-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87683

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0200 in. Radius x 0.2500 in. (1/4) Length of Cut x 1.5000 in. (1-1/2) Overall Length Carbide 4 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87684

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87685-HELICAL