0.0250 in. Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 54625-HARVEY

0.0625 in. (1/16) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 55204-C3

0.0625 in. (1/16) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 55204-HARVEY

0.1562 in. (5/32) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 55210

0.1562 in. (5/32) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 55210-C3

0.0550 in. (1.4 mm) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0650 in. Length Of Cut 3 Flute TiB2 Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56510-C8

0.0850 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1000 in. Length Of Cut 3 Flute TiB2 Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56520-C8

0.1760 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 0.2100 in. Length Of Cut 3 Flute TiB2 Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56540-C8

0.2360 in. (6 mm) Cutter Diameter x 0.0620 in. (1/16) Radius x 0.2800 in. Length Of Cut 3 Flute TiB2 Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56550-C8

0.0310 in. (1/32) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute AlTiN Coated Carbide Corner Rounding End Mill

Item Code: 57431-C3

0.0310 in. (1/32) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute Carbide Corner Rounding End Mill

Item Code: 57431-HARVEY

0.0100 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Corner Rounding End Mill

Item Code: 57510-C3

0.0100 in. Cutter Diameter x 0.0300 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57810-C6

0.0350 in. (.9 mm) Cutter Diameter x 0.1050 in. Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57835-C6

0.0450 in. Cutter Diameter x 0.1350 in. Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57845-C6