5.5mm Diameter Endmill, 5.5mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-5.500

6mm Diameter Endmill, 6mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-6.000

6.5mm Diameter Endmill, 6.5mm shank, 3 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-6.500

7mm Diameter Endmill, 7mm shank, 3 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-7.000

7.5mm Diameter Endmill, 7.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-7.500

8mm Diameter Endmill, 8mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-8.000

8.5mm Diameter Endmill, 8.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-8.500

9mm Diameter Endmill, 9mm shank, 3 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-9.000

9.5mm Diameter Endmill, 9.5mm shank, 3 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3307-9.500

0.5mm Diameter Endmill, 3mm shank, 2 flutes, 1mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle

Item Code: 3308-0.500

0.8mm Diameter Endmill, 3mm shank, 2 flutes, 1mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle

Item Code: 3308-0.800

1mm Diameter Endmill, 3mm shank, 2 flutes, 2mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle

Item Code: 3308-1.000

1.5mm Diameter Endmill, 3mm shank, 2 flutes, 3mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle

Item Code: 3308-1.500

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle

Item Code: 3308-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle

Item Code: 3308-12.000