1.000 mm Cutter Diameter x 0.100 mm Radius x 3.000 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 976822-C3

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 20660-HARVEY

0.2190 in. Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68219

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16050-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0050 in. Radius x 0.0310 in. (1/32) Length of Cut x 0.0620 in. (1/16) Reach 2 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 40239-C6

0.1875 in. (3/16) Cutter Diameter x 0.0050 in. Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 937905-C3

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 3 Deg. 1.5720 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

Item Code: 37393-C6

0.0350 in. (.9 mm) Cutter Diameter x 0.0520 in. Length of Cut x 0.5250 in. Reach 3 Flute Carbide Square End Mill

Item Code: 48935

0.0470 in. (3/64) Cutter Diameter x 0.0050 in. Radius x 0.0710 in. Length of Cut x 0.1410 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 947647-C6

0.0310 in. (1/32) Cutter Diameter x 0.1550 in. Length of Cut x 0.3100 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13631-C3

0.0780 in. (5/64) Radius x 0.0580 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 67678

0.0600 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 67860-C3

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 997112-C3

0.1875 in. (3/16) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 994712-C3

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951212-C3