0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87196

0.2500 in. (1/4) Shank Diameter x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47630-C3

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 784662

3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- .060CR

Item Code: 31719

0.1875 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23112-C3

5/16 in. x 2-1/2 in. Solid Carbide General Purpose Square End 4 Flute Endmill

Item Code: 4SE0312IR081A KC633M

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes WTF Coated Endmill

Item Code: GMHT12R5015WTF

0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57847-C6

5/32 Carbide ALTIN 4 Flute Solid Carbide STUB

Item Code: 64060-COATED

0.3750 in. (3/8) Cutter Dia. x 0.3750 in. (3/8) Shank Dia. x 0.7500 in. (3/4) Major Radius x 0.0200 in. Corner Radius x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Lens Multi-Axis Finisher Endmill

Item Code: 86368-HELICAL

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 59422

0.3125 in. (5/16) Cutter Diameter x 0.4700 in. Length of Cut x 1.6250 in. (1-5/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 33320-C3

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 10 RH Teeth 12 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 921016-C4

6.00 mm Cutter Diameter x 6.00 mm Shank Diameter x 0.480 mm Radius x 6.00 mm Length of Cut x 75.00 mm Overall Length x 36.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82707-HELICAL

0.1180 in. Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 44118-HARVEY