7/16 in. x 7/16 in. x 1 in. Solid Carbide General Purpose Square End 4 Flute Endmill

Item Code: 4SE0437IR100A KC633M

0.1562 in. (5/32) Cutter Diameter x 0.0050 in. Radius x 0.2350 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 954805-C3

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 0.7500 in. (3/4) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82699-HELICAL

3mm Diameter Endmill, 3mm shank, 4 flutes, 20mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3023-3.000

5/8 (.6250) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- .045CR

Item Code: 33831

0.0310 in. (1/32) Cutter Diameter x 0.0030 in. Radius x 0.0470 in. (3/64) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 987531-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1600 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 978220-C6

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62712-C6

0.0310 in. (1/32) Cutter Diameter x 0.0030 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 923631-C6

0.0930 in. (3/32) Neck Diameter x 0.5000 in. (1/2) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 52145-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 826712-C3

0.1562 in. (5/32) Cutter Diameter x 0.0100 in. Radius x 0.2340 in. (15/64) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 41610-C3

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0118 chamfer

Item Code: 6757-9.520

3/16 in. x 3/16 in. x 5/8 in. x 2 in. Solid Carbide 3 Flute Cylindrical Shank Square End Medium Length End Mill

Item Code: 3A19E05011SZT UNCOATED

0.0625 in. (1/16) Cutter Diameter x 0.0310 in. (1/32) Neck Length x 300 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 989562-C3