3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 38mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3741-3.00

10mm Diameter Endmill, 10mm shank, 4 flutes, 40mm Length of Cut, 48 Reach (mm), Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 3627-10.00

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 30/32° Helix Angle, 0.012 chamfer

Item Code: 3082-9.52

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3741-16.00

10mm Diameter Endmill, 10mm shank, 3 flutes, 19mm Length of Cut, Carbide, Bright Finish, HA Shank, 72mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3203-10.00

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3093-9.52

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3174-12.70

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3678-6.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3189-19.05

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

Item Code: 3078-7.94

3mm Diameter Endmill, 6mm shank, 3 flutes, 4mm Length of Cut, 15 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 41/43/45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3893-3.00

2.5mm Diameter Endmill, 6mm shank, 3 flutes, 3mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3558-2.50

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-6.35

6mm Diameter Endmill, 6mm shank, 3 flutes, 7mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 41/43/45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3893-6.00

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-15.874