0.0080 in. Radius x 0.0750 in. (1.9 mm) Head Diameter x 0.3120 in. (5/16) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58708-HARVEY

0.0120 in. Radius x 0.0750 in. (1.9 mm) Head Diameter x 0.2500 in. (1/4) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58712

0.0120 in. Radius x 0.0750 in. (1.9 mm) Head Diameter x 0.2500 in. (1/4) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 58712-C3

0.0150 in. (1/64) Cutter Diameter x 0.1250 in. (1/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59015-C6

0.0250 in. Cutter Diameter x 0.2030 in. (13/64) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59025-C6

0.0400 in. Cutter Diameter x 0.3250 in. Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59040-C6

0.0600 in. Cutter Diameter x 0.5000 in. (1/2) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59060-C6

0.0700 in. Cutter Diameter x 0.5700 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59070-C6

0.0780 in. (5/64) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59078-C6

0.0800 in. Cutter Diameter x 0.6500 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59080-C6

0.0900 in. Cutter Diameter x 0.7500 in. (3/4) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59090-C6

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59108-C6

0.1875 in. (3/16) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59112-C6

0.2500 in. (1/4) Cutter Diameter x 2.0000 in. (2) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59116-C6

0.0200 in. Radius x 0.0750 in. (1.9 mm) Head Diameter x 0.1090 in. (7/64) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 59220