0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 2.1250 in. (2-1/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 44347-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0600 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 45228

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 44122-HELICAL

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 3.2500 in. (3-1/4) Length of Cut x 6.0000 in. (6) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 05662

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 2.1250 in. (2-1/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 05262

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 05247

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 34032-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Aplus Coated Square Endmill

Item Code: 30032-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 48236-HELICAL

1/64 Inch Diamond Coated Carbide Square Endmill

Item Code: 931-000-456

1.00 mm Diameter x 3.00 mm Length of Cut x 38.00 mm Overall Length Carbide 4-Flute Square End Endmill

Item Code: 43002-RICHARDS

1.00 mm Diameter x 3.00 mm Length of Cut x 38.00 mm Overall Length Carbide 4-Flute Ball Nose Endmill

Item Code: 44002-RICHARDS

2.00 mm Diameter x 6.00 mm Length of Cut x 38.00 mm Overall Length Carbide 4-Flute Ball Nose Endmill

Item Code: 44004-RICHARDS

1.00 mm Diameter x 3.00 mm Length of Cut x 38.00 mm Overall Length Carbide AlTiN-Coated 4-Flute Ball Nose Endmill

Item Code: 44002-E

2.00 mm Diameter x 6.00 mm Length of Cut x 38.00 mm Overall Length Carbide AlTiN-Coated 4-Flute Square End Endmill

Item Code: 43004-E