0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut 2 Flute AlTiN Coated Carbide Reduce Shank Square End Mill

Item Code: 907812-C3

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute Carbide Reduce Shank Square End Mill

Item Code: 907816

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute AlTiN Coated Carbide Reduce Shank Square End Mill

Item Code: 907816-C3

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut x 140 Deg. Included 6RH Teeth 8 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908062

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut x 140 Deg. Included 6RH Teeth 8 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908062-C4

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 140 Deg. Included 7RH Teeth 9 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908078

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 140 Deg. Included 7RH Teeth 9 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908078-C4

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 140 Deg. Included 7RH Teeth 9 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908093

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 140 Deg. Included 7RH Teeth 9 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908093-C4

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 140 Deg. Included 8RH Teeth 10 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908108

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 140 Deg. Included 8RH Teeth 10 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908108-C4

0.1875 in. (3/16) Cutter Diameter x 0.5630 in. Length of Cut x 140 Deg. Included 9RH Teeth 11 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908112

0.1875 in. (3/16) Cutter Diameter x 0.5630 in. Length of Cut x 140 Deg. Included 9RH Teeth 11 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908112-C4

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 140 Deg. Included 10 RH Teeth 12 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908116

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 140 Deg. Included 10 RH Teeth 12 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908116-C4