1.0000 in. (1) Cutter Diameter x 2.0000 in. (2) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20564

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20616

0.3750 in. (3/8) Cutter Diameter x 1.7500 in. (1-3/4) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20624

0.7500 in. (3/4) Cutter Diameter x 2.5000 in. (2-1/2) Length of Cut 2 Flute Carbide Square Endmill

Item Code: TC63248

0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute Cobalt Square Endmill

Item Code: TE81227

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87712

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87625

0.1875 in. (3/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87637

0.3125 in. (5/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87640

0.1875 in. (3/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87649

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87652

0.1875 in. (3/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87661

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87676

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87685

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87688