0.1875 in. (3/16) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 943612-C3

0.2500 in. (1/4) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 943616

0.2500 in. (1/4) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 943616-C3

0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 943632

0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 943632-C3

0.0930 in. (3/32) Cutter Diameter x 0.0300 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 943893-C6

0.1000 in. Cutter Diameter x 0.0300 in. Radius x 0.3000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 943900-C6

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 943908-C6

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 943912-C6

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 943916-C6

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.8750 in. (1-7/8) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 944108

0.0150 in. (1/64) Cutter Diameter x 0.0230 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 944215-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 944220-C6

0.0250 in. Cutter Diameter x 0.0380 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 944225-C6

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 944231-C6