1/16 Tuff Cut® General Purpose, 2-Flute, Standard Length, Center Cutting, Ball Nose Endmill

Item Code: 15006250

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.3125 in. (5/16) Length of Cut x 2.0000 in. (2) Overall Length Carbide 3 Flute Uncoated 45 Deg. Helix Square Endmill

Item Code: 03090-HELICAL

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 4 Flute Tplus Coated High Feed Endmill

Item Code: 83730

0.5000 in. (1/2) Radius x 0.4060 in. (13/32) Pilot Diameter 3 Flute AlTiN Coated Carbide Tipped 5 Deg. Flare Corner Rounding End Mill

Item Code: 45032-C3

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill

Item Code: GM14F4

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Length of Cut x 120 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 988108-C3

0.0300 in. Cutter Diameter x 0.3000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 996230-C6

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0400 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 83489

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flute TPlus Coated Carbide Ball Endmill

Item Code: 88183-HELICAL

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 5 Helical Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 908416-C3

0.0625 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 955762

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length Carbide 3 Flutes Ball Nose Endmill

Item Code: GMA12BXL3

0.0180 in. Cutter Diameter x 0.0540 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73018-C3

1/2 (.5000) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36093

3/8 x 3/8 x 7/8 x 2-1/2 Inch Solid Carbide, 0.03 Corner Radius AlTiN Coated 4-Flute End Mill

Item Code: 4V0510004BT WP15PE