8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 38 Reach (mm), Carbide, FIREX Coated, HB Shank, 75mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3838-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 30mm Length of Cut, Carbide, FIREX Coated, HA Shank, 80mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 3839-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 36mm Length of Cut, Carbide, FIREX Coated, HA Shank, 93mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 3839-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 48mm Length of Cut, Carbide, FIREX Coated, HA Shank, 108mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

Item Code: 3839-16.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 60mm Length of Cut, Carbide, FIREX Coated, HA Shank, 126mm Overal Length, 35/38° Helix Angle, 0.45 chamfer (mm)

Item Code: 3839-20.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 18mm Length of Cut, Carbide, FIREX Coated, HA Shank, 65mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3839-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 24mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3839-8.000

2mm Diameter Endmill, 6mm shank, 2 flutes, 3mm Length of Cut, 28 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-2.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 3.5mm Length of Cut, 33 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-3.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 6mm Length of Cut, 9 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 7mm Length of Cut, 9.4 Reach (mm), Carbide, nano-Si Coated, HA Shank, 63mm Overal Length, 30° Helix Angle

Item Code: 3848-8.000

4mm Diameter Endmill, 6mm shank, 2 flutes, 4mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 80mm Overal Length, 30° Helix Angle

Item Code: 3849-4.000

6mm Diameter Endmill, 8mm shank, 2 flutes, 6mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 120mm Overal Length, 30° Helix Angle

Item Code: 3853-6.000

2mm Diameter Endmill, 6mm shank, 2 flutes, 3mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3856-2.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 3.5mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3856-3.000