0.5000 in. (1/2) Cutter Diameter x 3.0000 in. (3) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 55232-HARVEY

0.0050 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 55305-HARVEY

0.0100 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 55310-HARVEY

0.0150 in. (1/64) Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 55315

0.0200 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.7500 in. (3/4) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 55320

0.0937 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.2790 in. Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 55493-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.5700 in. Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 55512-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 55516

0.0620 in. (1/16) Neck Diameter x 0.5000 in. (1/2) Reach x 15 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 55615

0.0620 in. (1/16) Neck Diameter x 0.5000 in. (1/2) Reach x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 55630-C3

0.0620 in. (1/16) Neck Diameter x 0.5000 in. (1/2) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 55645

0.0620 in. (1/16) Neck Diameter x 0.5000 in. (1/2) Reach x 60 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 55660-HARVEY

0.0050 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.2500 in. (1/4) Reach 2 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 55705-C3

0.0050 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter x 0.3750 in. (3/8) Reach 2 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

Item Code: 56005

0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.1250 in. (1/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 56115-C6