0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 38015-C4

0.0250 in. Cutter Diameter x 0.0050 in. Radius x 0.0370 in. Length of Cut x 0.2030 in. (13/64) Reach 3 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 38325-C4

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 38362-C4

0.2500 in. (1/4) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 38416-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 38416-C3

0.1400 in. Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 39709-HARVEY

0.1400 in. Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39709-C3

0.0400 in. Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39771-HARVEY

0.0400 in. Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39771-C3

0.1000 in. Cutter Diameter x 0.0312 in. (1/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 39783

0.1000 in. Cutter Diameter x 0.0312 in. (1/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 39783-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 40120-C4

0.0469 in. (3/64) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 41303

0.0469 in. (3/64) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 41303-C3

0.0620 in. Cutter Diameter x 0.2180 in. (7/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 41304