0.0050 in. Radius x 0.0100 in. Pilot Diameter x 0.1560 in. (5/32) Reach 2 Flutes AlTiN Coated Carbide Corner Rounding End Mill

Item Code: 994605-C3

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.8750 in. (7/8) Length of Cut x 3.0000 in. (3) Overall Length 4 Flutes APLUS Coated Carbide Square Endmill

Item Code: 30632W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 1.5000 in. (1-1/2) Length of Cut x 4.0000 in. (4) Overall Length 4 Flutes APLUS Coated Carbide Square Endmill

Item Code: 30707W

0.4375 in. (7/16) Cutter Diameter x 0.4375 in. (7/16) Shank Diameter x 0.0200 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.7500 in. (2-3/4) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 31407W

0.4375 in. (7/16) Cutter Diameter x 0.4375 in. (7/16) Shank Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut x 3.5000 in. (3-1/2) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 31437W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 0.0300 in. Radius x 2.6250 in. (2-5/8) Length of Cut x 5.0000 in. (5) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 31737W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 0.0300 in. Radius x 3.0000 in. (3) Length of Cut x 6.0000 in. (6) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 31742W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 0.0300 in. Radius x 4.2500 in. (4-1/4) Length of Cut x 7.0000 in. (7) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 31752W

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 33167W

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0200 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 33227W

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0200 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 33257W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 0.0300 in. Radius x 4.2500 in. (4-1/4) Length of Cut x 7.0000 in. (7) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 33752W

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 1.5000 in. (1-1/2) Length of Cut x 3.5000 in. (3-1/2) Overall Length 5 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 34247W

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 34317W

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes APLUS Coated Carbide Corner Radius Endmill

Item Code: 43242W