0.0100 in. Cutter Diameter x 0.0150 in. (1/64) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 24510

0.1562 in. (5/32) Cutter Diameter x 0.0050 in. Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 75205-C3

0.2656 in. (17/64) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: TC11617

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Micro Endmill

Item Code: TC50458

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

Item Code: 6757-6.35

0.1875 in. (3/16) Cutter Diameter x 0.0600 in. Radius x 0.2810 in. (9/32) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 866012-C3

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 3 Flute Carbide Square Downcut End Mill High Finisher

Item Code: 873832

5/32 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3153-3.970

3/8 in. Diameter x 0.187 in. Length of Cut x 2-1/2 in. Overall Length x 90 Deg. Internal Angle GMX-35 Coated Carbide Chamfer Mill

Item Code: CM38C4090

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.0000 in. (1) Reach 2 Flute Carbide Ball End Mill

Item Code: 976308

2.000 mm Cutter Diameter x 10.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 974545-C6

0.7500 in. (3/4) Cutter Diameter x 0.0600 in. Radius x 3.0000 in. (3) Length of Cut 5 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC27955

3/16 x 3/16 x 5/8 x 2-1/4 Inch Solid Carbide AlTiN Coated 5 Flute Endmill

Item Code: TM5V0S05000S

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 4 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 777262-C6

1/2 (.5000) 4-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 60° Included Angle

Item Code: 36086