5.000 mm Cutter Diameter x 15.000 mm Length of Cut 4 Flutes AlTiN Nano Coated Carbide Ball Endmill

Item Code: 975364-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0030 in. Radius x 0.1000 in. Length of Cut 4 Flutes Carbide Corner Radius Endmill

Item Code: 981420

0.0200 in. (.5 mm) Cutter Diameter x 0.0030 in. Radius x 0.1000 in. Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 981420-C3

0.1250 in. (1/8) Cutter Diameter x 0.0400 in. Radius x 1.0000 in. (1) Length of Cut 4 Flutes Carbide Corner Radius Endmill

Item Code: 981940

0.1250 in. (1/8) Cutter Diameter x 0.0400 in. Radius x 1.0000 in. (1) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 981940-C3

0.6250 in. (5/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 300&deg 4 Flutes Carbide Undercutting Endmill

Item Code: 984040

0.6250 in. (5/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 300&deg 4 Flutes AlTiN Coated Carbide Undercutting Endmill

Item Code: 984040-C3

0.2500 in. (1/4) Shank Diameter x 60&deg per side 12 RH Teeth 3 LH Teeth Carbide Deburring Chamfer Cutter

Item Code: 994060

0.2500 in. (1/4) Shank Diameter x 60&deg per side 12 RH Teeth 3 LH Teeth AlTiN Coated Carbide Deburring Chamfer Cutter

Item Code: 994060-C3

0.0850 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1280 in. Length of Cut 4 Flutes Carbide Corner Radius Endmill

Item Code: 997985

0.0850 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1280 in. Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 997985-C3

0.0930 in. (3/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1400 in. (9/64) Length of Cut 4 Flutes Amorphous Diamond Coated Carbide Corner Radius Endmill

Item Code: 997993-C4

1 Inch Diameter Endmill, 1 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3170-25.40

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3153-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, Super A Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.02 chamfer

Item Code: 3886-12.70