1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3876-12.704

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, Bright Finish, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3175-12.70

1 Inch Diameter Endmill, 1 Shank, 5 flutes, Super A Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.031 chamfer

Item Code: 3886-25.40

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 40/42° Helix Angle, 0.004 chamfer

Item Code: 3077-4.76

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3081-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

Item Code: 3114-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40° Helix Angle, 0.0138 chamfer

Item Code: 3096-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3190-15.87

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-12.704

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3080-15.87

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3189-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 20° Helix Angle, 0.0118 chamfer

Item Code: 3189-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.062 radius

Item Code: 3091-6.356

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.031 radius

Item Code: 3091-9.524

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.062 radius

Item Code: 3091-19.056