0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 62062-HARVEY

1.500 mm Cutter Diameter x 7.500 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 974533-C6

0.2500 in. (1/4) Shank Diameter x 20 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18520-HARVEY

0.0625 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.1860 in. Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 54062-HARVEY

0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut x 0.1560 in. (5/32) Reach 3 Flute Carbide Square End Mill

Item Code: 982115

0.0930 in. (3/32) Cutter Diameter x 0.0050 in. Radius x 0.1390 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 39493

0.0200 in. (.5 mm) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 34920

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1390 in. Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 41593-C3

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 0.5650 in. Reach 3 Flute Carbide Ball End Mill

Item Code: 970731

0.0390 in. (1 mm) Cutter Diameter x 0.1170 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74339-C3

0.1875 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22712-C3

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13960-C3

0.1875 in. (3/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 50312-C4

0.0080 in. (.2 mm) Cutter Diameter x 0.0060 in. Length of Cut x 0.0120 in. Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37808-C6

0.0310 in. (1/32) Radius x 0.1875 in. (3/16) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16031