0.0220 in. Radius x 0.1875 in. (3/16) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16022-HARVEY

0.0270 in. Radius x 0.1875 in. (3/16) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16027-C3

0.0270 in. Radius x 0.1875 in. (3/16) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16027-HARVEY

0.0350 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16035-C3

0.0350 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16035-HARVEY

0.0450 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16045-C3

0.0450 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16045-HARVEY

0.0550 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16055-C3

0.0550 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16055-HARVEY

0.2500 in. (1/4) Radius x 1.0000 in. (1) Head Diameter x 1.5000 in. (1-1/2) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16116-C3

0.3750 in. (3/8) Shank Diameter x 30 Deg. Per Side 4 Flute Cobalt Pointed Chamfer Cutter

Item Code: 18124-HARVEY

0.5000 in. (1/2) Shank Diameter x 17.5 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18318-C3

0.5000 in. (1/2) Shank Diameter x 17.5 Deg. Per Side 4 Flute Carbide Flat Chamfer Cutter

Item Code: 18318-HARVEY

0.5000 in. (1/2) Shank Diameter x 27.5 Deg. Per Side 4 Flute Carbide Flat Chamfer Cutter

Item Code: 18328

0.5000 in. (1/2) Shank Diameter x 27.5 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18328-C3