0.7500 in. (3/4) Cutter Diameter x 2.5000 in. (2-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29648

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flute TPlus Coated Carbide Corner Radius Endmill

Item Code: 88212

1/4 x 3 x 1/4 Inch Solid Carbide Ball Nose Profile End Mill Cutter - CTX Coating

Item Code: SCBS 250-300-250-CTX-2

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 6 Flute Tplus Coated Carbide Square Endmill

Item Code: 59904-HELICAL

0.0550 in. (1.4 mm) Cutter Diameter x 0.2750 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 834155-C3

12.00 Carbide AlCrN Coated 40 Deg. Helix Angle 4 Flute Short Length Cyndrical Shank End Mill

Item Code: S76112.0

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 56208-C6

1/4 in. x 1/4 in. x 3/4 in. x 2-1/2 in. Solid Carbide Uncoated 2 Flute Ball Nose General Purpose End Mill

Item Code: I2B0250T075R

1/8 in. Diameter x 1/2 in. Length of Cut x 1-1/2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM18R4015

3/8 (.3750) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36148-F

0.0620 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59062-C6

1/8 in. Diameter x 1/2 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill

Item Code: GM18F4

3/8 in. Carbide ALTiN Coated RH 30 Deg. Helix Angle 4 Flute Straight Shank Medium Cut Length Square End Mill

Item Code: S2343/8

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 1.5000 in. (1-1/2) Length of Cut x 3.0000 in. (3) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 81404-HELICAL

0.1250 in. (1/8) Shank Diameter x 22.5 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 18723-HARVEY