0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut 3 Flute TiB2 Coated Carbide 45 Deg. Helix Square Endmill

Item Code: 747462-C8

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut 3 Flute TiB2 Coated Carbide 45 Deg. Helix Square Endmill

Item Code: 747478-C8

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 3 Flute TiB2 Coated Carbide 45 Deg. Helix Square Endmill

Item Code: 747493-C8

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute TiB2 Coated Carbide 45 Deg. Helix Square Endmill

Item Code: 747508-C8

2.000 mm Cutter Diameter x 0.200 mm Radius x 10.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius Finisher Endmill

Item Code: 747945-C6

3.000 mm Cutter Diameter x 0.200 mm Radius x 15.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius Finisher Endmill

Item Code: 747957-C6

1.000 mm Cutter Diameter x 0.100 mm Radius x 5.000 mm Length of Cut 6 Flute AlTiN Nano Coated Carbide Corner Radius Finisher Endmill

Item Code: 748522-C6

0.0200 in. Radius x 0.1070 in. Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding Endmill

Item Code: 748620-C3

0.0300 in. Radius x 0.1070 in. Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding Endmill

Item Code: 748630-C3

0.0600 in. Radius x 0.1070 in. Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding Endmill

Item Code: 748660-C3

0.0620 in. (1/16) Radius x 0.1070 in. Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding Endmill

Item Code: 748662-C3

2.000 mm Cutter Diameter x 0.200 mm Radius x 6.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius Finisher Endmill

Item Code: 748745-C6

3.000 mm Cutter Diameter x 0.200 mm Radius x 9.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius Finisher Endmill

Item Code: 748757-C6

0.0937 in. (3/32) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting Endmill

Item Code: 748893-C6

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 6 Flute AlTiN Coated Carbide Undercutting Endmill

Item Code: 748908-C6