3mm Diameter Endmill, 6mm shank, 6 flutes, 8mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3689-3.00

10mm Diameter Endmill, 10mm shank, 6 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3689-10.00

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 3736-10.00

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

Item Code: 3736-16.00

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3876-6.354

6mm Diameter Endmill, 6mm shank, 4 flutes, 10mm Length of Cut, 17 Reach (mm), Carbide, FIREX Coated, HB Shank, 54mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3731-6.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HB Shank, 3 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

Item Code: 3100-12.70

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 35/38° Helix Angle, 0.1 chamfer (mm)

Item Code: 3736-4.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.024 chamfer

Item Code: 3080-19.05

7/16 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3150-11.11

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

Item Code: 3876-25.409

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40/42° Helix Angle, 0.01 chamfer

Item Code: 3078-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3081-12.70

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HA Shank, 57mm Overal Length, 35/38° Helix Angle

Item Code: 3498-6.005

12mm Diameter Endmill, 12mm shank, 4 flutes, 45mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 3627-12.00