3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 5 Overall Length, 30/32° Helix Angle, 0.0197 chamfer

Item Code: 4256-19.05

25/64 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3153-9.92

3/8 Inch Diameter Endmill, 5 flutes, 1 Length of Cut, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 4263-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3189-15.87

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/37/38° Helix Angle, 0.024 chamfer

Item Code: 6757-19.05

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 35/38° Helix Angle

Item Code: 3872-16.01

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, Bright Finish, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.1 chamfer (mm)

Item Code: 3202-4.00

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.031 radius

Item Code: 3091-19.054

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 30° Helix Angle, Ball Nose

Item Code: 3727-8.00

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3179-7.94

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3087-3.174

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, Ball Nose

Item Code: 4261-7.94

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-3/4 Overall Length, 36/37/38° Helix Angle, 0.0138 chamfer

Item Code: 6757-11.11

5mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, Bright Finish, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.03 chamfer (mm)

Item Code: 3309-5.00

5mm Diameter Endmill, 6mm shank, 2 flutes, 6mm Length of Cut, Carbide, Bright Finish, HA Shank, 54mm Overal Length, 45° Helix Angle, 0.03 chamfer (mm)

Item Code: 3310-5.00