1/32 (.0312) Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 32030

5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.06 in. Radius Carbide 3 Flutes Endmill

Item Code: GMA58RHL3060

0.2500 in. (1/4) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0100 in. Tip Diameter Carbide 4 Helical Flute Aplus Coated Chamfer Mill

Item Code: 83808-HELICAL

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.2500 in. (1/4) Length of Cut x 3.0000 in. (3) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82698

0.0150 in. (1/64) Cutter Diameter x 0.0030 in. Radius x 0.0220 in. Length of Cut x 0.1250 in. (1/8) Reach 4 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 729615-C3

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

Item Code: 3114-11.110

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 0.6700 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 934893-C3

1/2 in. Diameter x 3 in. Length of Cut x 6 in. Overall Length Carbide 5 Flutes Square GMX-35 Coated Endmill

Item Code: GM12FSL5

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Square Endmill

Item Code: 82264

1/16 (.0625) Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

Item Code: 32141-FULLERTON

3/4 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.09 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill

Item Code: GMHX34R4090

3/8 Inch Diameter, 1/2 Inch LOC, 2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill with 0.030 Radius

Item Code: 17837504A

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.04 radius

Item Code: 3876-12.705

0.1150 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 0.1400 in. (9/64) Length Of Cut 3 Flute TiB2 Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56530-C8

0.1250 in. (1/8) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 990608