0.1150 in. Head Diameter x 0.0200 in. Loc x 0.2180 in. (7/32) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943410-C3

0.2500 in. (1/4) Head Diameter x 0.0440 in. Loc x 0.4370 in. (7/16) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943416

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943420

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943420-C3

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.3120 in. (5/16) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943430

0.2100 in. Head Diameter x 0.0370 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 943440

0.2100 in. Head Diameter x 0.0370 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943440-C3

0.3120 in. (5/16) Head Diameter x 0.0550 in. Loc x 0.5620 in. (9/16) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 943460

0.3120 in. (5/16) Head Diameter x 0.0550 in. Loc x 0.5620 in. (9/16) Neck Length x 45 Deg. Per Side 6 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943460-C3

0.3750 in. (3/8) Head Diameter x 0.0660 in. Loc x 0.7500 in. (3/4) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 943470

0.3750 in. (3/8) Head Diameter x 0.0660 in. Loc x 0.7500 in. (3/4) Neck Length x 45 Deg. Per Side 6 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 943470-C3

0.5000 in. (1/2) Head Diameter x 0.0880 in. Loc x 1.0000 in. (1) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 943480

0.1250 in. (1/8) Cutter Diameter x 0.0470 in. (3/64) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 943608

0.1250 in. (1/8) Cutter Diameter x 0.0470 in. (3/64) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 943608-C3

0.1875 in. (3/16) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 943612