1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/37/38° Helix Angle, 0.0161 chamfer

Item Code: 6757-12.70

0.3120 in. (5/16) Radius x 0.2470 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 21312-C3

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 3.0000 in. (3) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 46096-HELICAL

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.1860 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 45662-C3

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 961362

0.0400 in. Cutter Diameter x 0.0100 in. Radius x 0.1200 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 27240-C3

0.3750 in. (3/8) Cutter Diameter x 0.0300 in. Radius x 0.5700 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 915230-C3

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length Carbide 5 Flutes Square GMS2 Coated Endmill

Item Code: GMHT38FH5

1/8 x 1/4 x 1-1/2 Carbide ALTIN 4 Flute Square End Endmill

Item Code: 64050-COATED

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

Item Code: GMHT14R7060

0.0625 in. (1/16) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 220 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22704-C3

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 31137-HELICAL

3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.03 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM316R4030

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 915078-C3

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.1860 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 26362-C3