3/16 Inch Diameter Endmill, 3/16 Shank, 5 flutes, 5/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 45° Helix Angle

Item Code: 6776-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 5 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 45° Helix Angle

Item Code: 6776-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 5 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 45° Helix Angle

Item Code: 6776-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 5 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 45° Helix Angle

Item Code: 6776-9.520

3/4 x 3/4 x 1-5/8 x 3-7/8 Inch Bright HSS 4-Flute, Non-Centering, Series 1897 Endmill

Item Code: MCT 43516

0.0630 in. (1.6 mm) Cutter Diameter x 0.0950 in. Length of Cut 4 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 14063-C3

0.0630 in. (1.6 mm) Cutter Diameter x 0.0950 in. Length of Cut 4 Flutes Carbide Square End Mill

Item Code: 14063-HARVEY

0.1030 in. Cutter Diameter x 0.1550 in. Length of Cut 4 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 14103-C3

0.1030 in. Cutter Diameter x 0.1550 in. Length of Cut 4 Flutes Carbide Square End Mill

Item Code: 14103-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0350 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 32435-C3

0.1250 in. (1/8) Cutter Diameter x 0.0350 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flutes Carbide Corner Radius End Mill

Item Code: 32435-HARVEY

0.0130 in. Cutter Diameter x 0.0190 in. Length of Cut x 0.0650 in. Reach 3 Flutes Amorphous Diamond Coated Carbide Square End Mill

Item Code: 33213-C4

0.0550 in. (1.4 mm) Cutter Diameter x 0.4500 in. Length of Cut 3 Flutes Carbide Square End Mill

Item Code: 33655

0.0550 in. (1.4 mm) Cutter Diameter x 0.4500 in. Length of Cut 3 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 33655-C3

0.1875 in. (3/16) Cutter Diameter x 0.0350 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flutes AlTiN Coated Carbide Corner Radius End Mill

Item Code: 34835-C3