3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 3/8 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.013 radius

Item Code: 3192-9.520

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3202-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3202-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, HA Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

Item Code: 3202-16.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, HA Shank, 104mm Overal Length, 40/42° Helix Angle, 0.45 chamfer (mm)

Item Code: 3202-20.000

5mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 18 Reach (mm), Carbide, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.1 chamfer (mm)

Item Code: 3202-5.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.15 chamfer (mm)

Item Code: 3202-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, HA Shank, 63mm Overal Length, 40/42° Helix Angle, 0.15 chamfer (mm)

Item Code: 3202-8.000

11mm Diameter Endmill, 11mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-11.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-12.000

13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-13.000

15mm Diameter Endmill, 15mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-15.000

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-16.000

18mm Diameter Endmill, 18mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3203-18.000

2mm Diameter Endmill, 2mm shank, 3 flutes, 6mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3203-2.000